Silicone Base Reclaim Catcher

Each part of this reclaim catcher is designed for a better, cleaner dabbing session. This table shows how each feature provides value.

Picking the right reclaim catcher is key for proper function and a good seal. Use this guide to match the angle and joint size to your water pipe.

What Is The Difference Between 45 And 90 Degree Angles?

The angle of the reclaim catcher must match your rig's joint. A 90-degree catcher is for rigs where the joint points straight up, which is common on straight tubes. A 45-degree catcher is for rigs with an angled joint, typically found on beaker-style water pipes.

Should I Get a 14 mm or an 18 mm Reclaim Catcher?

This refers to the diameter of your rig's joint. 14mm is the most common size, while 18mm is often on larger pieces and gives more airflow. To get the right size, measure your rig's joint or check its specs. You also need to match the gender: a female rig joint needs a male reclaim catcher, and a male rig joint needs a female one.

• 90° reclaim catchers are for vertical joints, common on straight-tube rigs.
• 45° reclaim catchers are for angled joints, typical of beaker-style rigs.
• 14mm and 18mm are the standard joint sizes; measure yours to ensure a match.

Beyond getting the right fit, this reclaim catcher has features designed for convenience and long life.

How Does The Removable Silicone Jar Work?

The 1.5 oz silicone jar is held at the bottom with a strong clamp. After your session, just unlatch the clamp to take off the jar. The non-stick silicone surface lets you easily scoop out the collected reclaim. It's a clean system that avoids the messy work of scraping reclaim from glass.

Why Is A Spill-Resistant Base Important?

The silicone base provides a wide, stable footprint that helps keep your rig from tipping over with the extra weight. Its shock-absorbent material also adds a layer of protection for the glass parts.

Follow these easy steps to start collecting reclaim and keep your rig clean every time you dab.

1. Attach It: Connect the reclaim catcher to your water pipe's joint. Then, attach your banger to the top of the reclaim catcher.
2. Heat Your Banger: Heat your banger normally, but be sure to aim the flame away from the catcher's glass body and silicone jar.
3. Take Your Dab: As you dab, any extra concentrate will drip down from the banger.
4. Collect the Reclaim: The concentrate flows through the catcher's arm and collects in the silicone jar at the bottom.
5. Remove and Store: After the unit is completely cool, unlatch the clamp to remove the silicone jar. Your reclaim is now ready to use or store.

• The process is just attaching it, heating your banger, and letting the catcher work.
• Always let the system cool down fully before handling the silicone jar.
• The non-stick jar makes moving the collected reclaim quick and mess-free.

While some accessories help keep a rig clean, this Silicone Base Reclaim Catcher is unique because it filters and saves material. Here is how it compares to other affordable options.

Keeping your catcher clean maintains good performance and flavor. It is best to clean the glass and silicone parts separately.

• For Glass Components: The main glass body can be cleaned like your rig. Soaking it in 99% isopropyl alcohol and rinsing with hot water will remove any residue.
• For the Silicone Jar: Avoid using alcohol on silicone, as it can damage it over time. Instead, wash the silicone jar with warm, soapy water. For tough residue, you can freeze the jar to make the reclaim brittle and easy to pop out.

A quick check before and after each session will ensure your equipment stays in top shape.

Before Your Session

• Confirm the joint size (14mm/18mm).
• Verify the angle matches your rig (45°/90°).
• Check that the clamp is securely latched.
• Ensure the banger has enough clearance.
• Rinse any new parts before you use them for the first time.

After Your Session

• Let the entire unit cool down completely.
• Remove the collected reclaim from the jar.
• Wipe down the joint connections.
• Look at the seals and clamp for any wear.
• Store it in a safe place to prevent tipping.

Looking for other ways to improve your setup? Check out our full collection of ash catchers, reclaimers, and adapters to find the perfect piece for your needs.

• Ash Catchers